Medea+FWST

Digital Inputs:
(3) XLR connectors (inputs 1..3)
(1) Toslink connector (optical) (input 4)
(4) RCA connectors (inputs 1..4)
All inputs accept professional or consumer standard in the Channel Status Data
Sampling Frequencies: 44.1, 48.0, 88.2 or 96.0 kHz, 176.4 and 192kHz on two inputs
Sampling frequency tolerance: +-80ppm
Maximum input wordlength: 24 Bits
Analog Outputs:
(2) XLR Connectors
(2) RCA Connectors
Servoless, DC coupled, short circuit proofed output circuitry
Output impedance: 0.2 Ohm
Output level "low" mode: variable from -infinity to +15dBu
Output level "high" mode: variable from -infinity to +27dBu
Output level variable with two 25 turn trim potentiometers
Output stage: Discrete Class A

Converters:
Multibit sigma-delta converters
Correlation technique using two converters per channel

Synchronization:
Synchronized via input signal
Extremely efficient Jitter attenuation down to subsonic frequencies
Sampling Frequencies: 44.1 kHz, 48.0 kHz, 88.2kHz or 96.0kHz, 176.4 and 192kHz

Power:
Mains Voltage: 110 / 220 Volt
Fuse rating: 500 mA slow blow
Power Consumption: 80VA max.

Measurements:
Measurements taken at the following conditions (unless noted otherwise): +27dBu output level, 44.1kHz sampling frequency (fs), 22kHz measurement bandwidth.

Frequency Response:
@ fs = 44.1kHz: DC ... > 20kHz +- 0.05dB
@ fs = 48.0kHz: DC ... > 20kHz +- 0.05dB
@ fs = 88.2kHz: DC ... > 40kHz +- 0.5dB
@ fs = 96.0kHz: DC ... > 40kHz +- 0.5dB

Dynamic Range:
115dB unweighted, 118dB A-weighted
THD+N @ 1kHz:
-107 dBr @ -3 dBFs input, (0dBr = +27dBu)
-105 dBr @ 0 dBFs input, (0dBr = +27dBu)

SNR @ -40dBFS input:
114dBr unweighted (0dBr = +27dBu)
117dBr A - weighted (0dBr = +27dBu)

Linearity:
from 0 to -100dBFs input level: < +-1dB deviation from ideal
from -100 to -130dBFs input level: < +-1.5dB deviation from ideal
Crosstalk:
< -130dB, 0..20kHz