您在這裡

YGGDRASIL 世界之樹 (已停售)

YGGDRASIL 世界之樹 (已停售)
產品介紹

Closed-Form Digital Filter Preserves Original Samples
Most DACs simply use the stock digital filters embedded in their D/A converters. But even the most sophisticated ones, using their own digital filter algorithms, don’t have what Yggdrasil has—a digital filter with a true closed-form solution. This means it retains all the original samples, performing a true interpolation. This digital filter gives you the best of both NOS (all original samples retained) and upsampling (easier filtering of out-of-band noise) designs—and it is only available on Yggdrasil. 

21 Bits, No Guessing: Mission-Critical D/A Technology
When doctors are trying to diagnose whether you have gas or cancer from MRI results, or when the military is trying to ensure a missile hits an ammo dump and not a nunnery next door, they don’t use “24 bit” or “32 bit” delta-sigma D/A converters. Instead, they rely on precision, multibit ladder DACs, like the Analog Devices AD5791. This allows them the bit-perfect precision they need for critical applications, rather than the guesswork of a delta-sigma. We chose this same critical technology for Yggdrasil. Following these unique D/A converters are sophisticated discrete JFET buffers and summers. 

Adapticlock and USB Gen 3: Advanced Input Optimization
Yggdrasil accepts up to 5 digital inputs and carefully manages them with our Adapticlock™ clock regeneration system. Adapticlock is the most sophisticated clock management system in the world. It assesses the quality of all inputs, measures their incoming center frequency and jitter, and automatically routes the input to the best clock regeneration system. Yggdrasil also features our all-new USB Gen 3 input module, for exceptional USB input performance.

產品規格

輸入:AES / EBU XLR,RCA SPDIF,BNC SPDIF,光纖 SPDIF,USB 
輸入能力:所有輸入對應高達24bit / 192kHz
輸出:一組 XLR 平衡和兩組 RCA 單端
輸出阻抗:75 歐姆
頻率響應/模擬階段:20Hz - 20KHZ,+ / - 0.1分貝,0.5Hz - 200KHz,-1dB
最大輸出:4.0V RMS(平衡),2.0V RMS(單端)
THD:(20Hz - 20KHz)小於 0.006%,以全功率輸出IMD:  < 0.007%,CCIR
信噪比:> 117 分貝,參考自 2V RMS
可升級設計:機身採用完全模塊化的架構
消耗功率: 35W
尺寸: 16" × 12" × 3.875"
重量: 25 lb

Inputs: AES/EBU XLR, RCA SPDIF, BNC SPDIF, Optical SPDIF, USB 
Input Capability: up to 24/192 for all inputs
Input Receiver, SPDIF: AKM AK4313
Input Receiver, USB: C-Media CM6632
 
Clock Management: Bitperfect clock management at all native sample rates via Adapticlock analysis and VCXO/VCO regeneration, plus asynchronous USB Gen 3 module
Digital Filter: proprietary Schiit bitperfect closed-form digital filter implemented on Analog Devices SHARC DSP processor
D/A Conversion IC: Analog Devices AD5791BRUZ x 4 (2 per channel, hardware balanced configuration)
Analog Stages: Fully discrete JFET buffers for balanced output and discrete JFET summing stages for single-ended output, direct coupled throughout
 
Output: One pair XLR balanced and two pairs RCA single-ended
Output Impedance: 75 ohms
 
Frequency Response, Analog Stage: 20Hz-20Khz, +/-0.1dB, 0.5Hz-200KHz, -1dB
Maximum Output: 4.0V RMS (balanced), 2.0V RMS (single-ended)
 
THD: Less than 0.006%, 20Hz-20KHz, at full output
IMD: <0.007%, CCIF, at full output
SNR: > 117dB, referenced to 2V RMS
 
Power Supply: two transformers (one for digital supplies, one for analog supplies) plus one input choke for discrete, dual mono, shunt-regulated analog +/-24V supply, plus 12 separate local regulated supplies for DACs and digital sections, including high-precision, low-noise LM723 regulation in critical areas.
 
Upgradability: Fully modular architecture. Separate digital input board, USB input board, DSP engine board, and DAC/analog output boards.
 
Power Consumption: 35W
Size: 16 x 12” x 3.875”
Weight: 25 lbs

定價:
100.000
售價:

販售商品皆為代理商公司貨,購買商品時會附上代理商的保固卡或保證書。

也請您詳細閱讀保固內容,以便瞭解自己的權益。

商品的保固期限自購買日 算起,視代理商的保固期限有一年或是兩年保固。